Hi All
In a DB I have a 60 amp main switch. Would 10mm single core house wire be large enough for the outgoing of the 60 amp main switch.
Summation of loads is higher than 60 amps.
I am not sure where DB wires ratings fit in on the cable rating charts.[clipped direct??]
Maby someone could help.
Or am I missing the ball totally.
I know 16mm cable is OK.
In this same DB I have a situation where the supply cable is 16mm to the prepaid meter. From the prepaid meter the installer installed a 10 mm single core wire to the main 60 amp isolator/circuit breaker. The question would be is this 10mm from the prepaid meter to the main isolator fine as per the SANS charts. Where do DB wires fit in on the SANS charts.


Thanks



Sent from my ANE-LX1 using Tapatalk