This is a copy paste from the one I sent dave:
4.1. SPECIFIC CONTENTS PAPER 1 (CODE: 11040412)
4.1.1. Occupational Health and Safety Act, Act 85 of 1993
Section 1, 8, 9, 10 and 22
4.1.2 Occupational Health and Safety Act, Act 85 of 1993 - Electrical Installation Regulations
Regulations 1 to 14
4.1.3 Occupational Health and Safety Act, Act 85 of 1993 - Electrical Machinery Regulations
Regulation 1, 3, 5, 6 and 11
4.1.4 Occupational Health and Safety Act, Act 85 of 1993 - Construction Regulations
Regulations 22
4.1.5 SANS 10142-1:2008
The wiring of premises Part 1: Low voltage installations
Section 1 - Scope
Section 2 - Normative references
Section 3 - Definitions
Section 4 - Compliance
Section 5 - Fundamental requirements
Section 7 - Special installations or locations
Annexure D - Example of assessing estimated and connected load.
Annexure F - Recommended bending of cables
Annexure G - Examples of determining the conduit size required for single-core
cables of different sizes.
Annexure J - Explanation of IP ratings
Annexure M - Electricity supply systems
Annexure P - Authority for issuing a Certificate of Compliance
Annexure Q - IEC symbols associated with switchgear
4.1.6 SANS 10198-1:2004
The selection, handling and installation of electric power cables of rating not
exceeding 33 kV Part 1: Definitions and statutory requirements
4.1.7 SANS 10198-2:2004
The selection, handling and installation of electric power cables of rating not
exceeding 33 kV Part 2: Selection of cable type and methods of installation
NOTE: No calculations will be asked on this standard
4.1.8 SANS 10292:2001
Earthing of low-voltage (LV) distribution systems
TOTAL MARKS: 100
NOTE as I said before the Ocuppational h&s docs can be downloaded from the Department of labours website.
Here is a link:
http://www.labour.gov.za/legislation...th-and-safety/
Did you like this article? Share it with your favourite social network.