I have a Growatt Inverter 3KW (SPF 3000TL HVM-24V)
Connected to brand new
Esener ES25.6V 100Ah Lithium ion Battery
Energy: 2.56KWH
Rated Voltage: 25.6
Max Charge Current:100A
Max Discharge Cur: 100A
Parallels: Max Support 2S2P

The inverter does not stop charging.

The inverter is just connected to Mains 230V
No solar panels
or Generator

These are my settings:-

Setting 1: Output Source 1 UTI
Setting 2: Max Charging amps 2 50
Setting 3: Input Voltage 3 APL
Setting 4: Power Saving 4 SdS
Setting 5: Battery Type 5 USE
Setting 6: Overload Restart 6 LFD
Setting 7: Temperature Restart 7 LFD
Setting 8: Output Voltage 8 230
Setting 9: Output Frequency 9 50
Setting 10: Number of batteries 10 2
Setting 11: Max Utility Charge 11 20
Setting 12: Battery Low Voltage, switch to grid -Volts 12 23
Setting 13: Battery voltage, switch to battery 13 28
Setting 14: Charger Source 14 CUT
Setting 15: Annoying Beep 15 BOF
Setting 16: Backlight 16 LOF
Setting 17: Alarm 17 AON
Setting 18: Overload Bypass 18 byd
Setting 19 - Bulk, 19 28.2
Setting 20 - Float 20 27
Setting 21 - Low Battery 21 23
Setting 22: Solar Balance 22 SbE
Setting 24: Ground Neutral relay 24 dlS

Can anybody advise me what to look for please?