I am looking for a quick cheap solution.
I have 1 building partitioned into 10 sections and each shop must have a ready board prepaid meter installed.
My plan is to run a cable from the main DB in different building to a sub DB on one side of the building. Then run a 16 mm cable from a 60 amp mcb to a junction box below a ready board, join the the 16 mm wires and fit a tail from the junction box up into the ready board main switch out to a pre paid meter and into the ready board. Maybe fit a 20 or 30 amp mcb before the main switch in each ready board.
The cable to each junction box and up to the ready board will be 16 mm cable, protected by the 60 amp breaker in the sub DB,
I have also considered fitting a 6 way DB below the ready board with a 20 or 30 amp breaker, but that would just create more cost.
Did you like this article? Share it with your favourite social network.