This is where we create and analyze our own ideas in advancing electronic things, okay? i am explaining htis to you very simply so you can understand, and, quite frankly, this is the only way i can understand too!
Analogue electronics are superior to digital ones performance wise. this is because, well, for example, if you were to take a camera, which gives the better picture - a glass analogue one or a digital one in pixels? or, a monitor with a photo superimposed or presented on it, or a lot of little lights?Originally Posted by http://en.wikipedia.org/wiki/Analogue_electronics
So, this is the way it works. how do we improve on it? well, first we need to take one aspect of it, and observe that for noise;Originally Posted by http://en.wikipedia.org/wiki/Analogue_electronics
So, we need to clear up the noise of these superior systems. if we were to analyze that the system will present the direct applied instructions, or, really simple stuff, then you will see that it is a 'flawless' system. well, i find it flawless anyways...Originally Posted by http://en.wikipedia.org/wiki/Analogue_electronics
Now, if you were to look at the analogue system, you need to clear this noise that covers the whole system or 'thing.' this means that you need to clear the 'messages' to the 'system.' this means you need to clear the input to the 'system' or 'engine' or 'processor' or 'thing doer.' this can be done by, for phones, for example, you could take the wires and separate them, as they do, with rubber or something, preventing cross talk or noise from one wire to the other, like the wind blowing into your ear when you are trying to talk to your friend. this can be done better by using a single cable for the phone. this can be done by observing the simplest phone being a one way cotton string, but this is hard to put through a directory, so...
You need to replace the telephone lines with some sort of wire that is polarized against other wires of the same material or 'stuff.' this means you need to have a few anti electrons in the wire makeup. this means you need to have a material that repels itself from the same stuff. this means you need to use the same wires for all 'connections,' so, if it is bronze, you use other bronze wires. i think they mix them up for each connection, but if they were to just use one type, problem solved.
Did you like this article? Share it with your favourite social network.