Results 1 to 3 of 3

Thread: UNDERTILE HEATING... ALL THESE QUOTES!!! HELP

  1. #1
    New Member
    Join Date
    Apr 2019
    Location
    johannesburg
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    UNDERTILE HEATING... ALL THESE QUOTES!!! HELP

    Good day everyone.

    I need some advice/help. I am currently building and am installing undertile heating in a variety of areas in my home...
    I, like any responsible consumer, sent out quote requests to various different suppliers... I have now received back all these quotations and am totally baffled as to what is what! I pretty much don't have clarity as to what I should be made aware of, what I am getting for my money etc!

    Some advice from any professionals out there?

    Kind regards
    Tallulah

  2. #2
    Full Member
    Join Date
    Sep 2018
    Location
    Johannesburg
    Posts
    41
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Getting a quotation for underfloor heating can be an extremely daunting task. As a customer, you provide your wall to wall measurments, the floor cover you intend to use, (carpets, tiles, wood etc) then sit back and wait... lo and behold, you are suddenly receiving quotations with different Killowatts, thermostats, PVC or Teflon coated wires ?? So, how do you, as an end user, know what you are getting... and why, in some cases, there is such a varient in price??? Here are a few basic principales to focus on:

    TEFLON VS PVC:

    PVC is what the good old fashioned underfloor heating was coated with. *This system, back in the dark ages, was actually placed within the concrete slab of your floor, as apposed to the newer generation heating that is literally placed directly under your floor covering of tiles, wood etc) Whilst there is nothing essentially WRONG with PVC, it is a much cheaper product than TEFLON. What has also been discovered over the years, is that the lime in your screed actually eats away at PVC, making it extremely brittle after a few years. Eventually, this corrosion process can cause the element to burn out in certain spots.TEFLON will basically outlast your flooring.

    KILLOWATT PER M2:

    NOW THIS IS HIGHLY IMPORTANT!!!
    The basic principle to follow, when getting a quotation for underfloor heating, is as follows: You require a KILOWATT of heating power for every 10/12m2 of room space (from wall to wall) The system itself will not cover wall to wall, however, you need this amount of power per m2 to ensure a cost effective and efficient heating system. Basically what happens if you undercut on the required killowatt, is that the system runs for an extended period of time before the room will reach the ambient temperature that you have set the thermostat to, thus resulting in extremely hot floors, sometimes cracked tiles and a system that costs you a fortune to run! (Imagine trying to tow a 4x4 bakkie with a Ford KA...The little KA is going to burn out its engine and die after 2min as the load is simply to heavy!! for lack of a better analagy)

    THERMOSTATS:

    There are two basic varieties when it comes to a thermostat... A probe thermostat, or an air thermostat.
    Lets explore the difference...

    A probe thermostat will read the temperature of the floor you are heating... So if you set the thermostat, to say 28 degrees, it will switch off when the actual surface of the floor reaches 28 degrees. This thermostat is recommended when the actual unit needs to be sitiuated outside the area that you are heating. (For eg: If you are heating an ensuite bathroom and the thermostat is situated inside the bedroom) This thermostat is also used when heating laminated wooden flooring, as wooden flooring can only be heated to a maximum of 28 degrees FLOOR TEMPERATURE.

    An air thermostat will do exactly what the name stipulates...It will read the temperature of the air in the enviroment that it is situated in. A pointer to remember in this scenario is that if you set the thermostat to say 30 degrees, it will only switch off when the ambiant temperature of the air is 30 degrees. As we know, hot air rises and circulates, so the temperature of the actual floor surface will be more than the temperature of the air.

    There are also two different "types" of thermostats available... Digital or analogue.
    Digital thermostats can be set with a variety of different options, ranging from different setting per day, to different setting per hour...basically little computers!
    Analogue thermostats are the no mess, no fuss thermostats of the underfloor heating world. Turn the dial to the required temperature and TAAADAAAAA, it does its job.
    (a bit like a smartphone VS a landline... they both can ultimately make a call)

    As you can see, underfloor heating (as with any product) has many different aspects and varieties to keep in mind when selecting which product/company to go for. Always ask plenty of questions and ensure that you have educated yourself on exactly what bang you are getting for your buck!

    Please dont hesitate to contact us if we can be of any further assistance.

  3. #3
    Moderator IanF's Avatar
    Join Date
    Dec 2007
    Location
    Jhb
    Posts
    2,649
    Thanks
    195
    Thanked 525 Times in 401 Posts
    The IP address used for the above posts is exactly the same. Be aware that this may be a way to get information out.
    Only stress when you can change the outcome!

Similar Threads

  1. Geyser not heating
    By Bonga Mkhize in forum General Chat Forum
    Replies: 4
    Last Post: 23-Oct-17, 11:01 PM
  2. Underfloor heating circuits
    By kosmonooit in forum Electrical Contracting Industry Forum
    Replies: 11
    Last Post: 26-Oct-16, 02:52 PM
  3. [Question] LED strips over heating
    By skatingsparks in forum Electrical Contracting Industry Forum
    Replies: 8
    Last Post: 05-Jul-14, 07:35 PM
  4. lighting/ heating tip
    By murdock in forum Energy and Resource Conservation Forum
    Replies: 1
    Last Post: 09-Jul-11, 01:05 PM
  5. Pool Heating
    By daveob in forum Energy and Resource Conservation Forum
    Replies: 2
    Last Post: 22-Sep-10, 08:43 AM

Tags for this Thread

Did you like this article? Share it with your favourite social network.

Did you like this article? Share it with your favourite social network.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •