Charge settings

[Eros]

I need help please.
I recently installed a Sunsynk 5Kw Hybrid inverter using a HUBBLE AM-2 Battery. I am using the system as a UPS, no solar connected, charging with Grid.
What should the charge volt settings be?

Float
Absorbtion
Equalization.

On HUBBLE web for the AM-2 battery, it gives Equalization and Float volts as 53.8V, but the sticker on the side of the battery, Equalization 53.6V and Float 52.6V. Nowhere it tells me what the Absorbtion volt setting should be.

Thanks

[GCE]

Do you not have a BMS cable connected - If so let the BMS determine the settings

Use battery settings to then limit grid charging to ensure you keep it below 20 amps from mains and give a 5 minute reconnection time to allow voltage to settle

[Isetech]

Sorry I cant help you, I was going to use hubble batteires, but couldnt even get the sales people to respond to emails. Did I make the right decision with the rband I chose to support, all I am going to say for now, it certianly has been a challenge even trying to get support from the brand. It has improved as we identify the correct people to deal with.

There is hope, contact Voltex, they seem to be dealing with Hubble.